Neets Control - SieRRa II 8-Button Keypad with remote monitoring and iOS/Android Description Neets Control – SieRRa II provides uniform AV control interface in all rooms through an 8-Button Keypad with built-in controller.SieRRa II also enables touch control with a tablet (iOS or Android) through a built-in webserver. PoE support to avoid an external PSU. Email notification on lamp/filter hours and warnings as well as Central Control monitoring is supported as a standard. Choose variant Neets Control - SieRRa II, EU size Anthracite White Request a quote on this product. Get a quote × To get a Quote, Please fill the below fields. Full Name * City * Email * Phone* Company Name* Company Type* Select company type... Architect AV Distributor AV Reseller AV System Integrator Consultant Device Provider Electrician End-Customer End-User Installer IT Reseller Manufacturer Office Supply Other Press Public/Government Residential Service Provider Shipping Supplier Item* SieRRa II (Anthracite) Select other Item... QueBec II QueBec III BraVo OsCar EcHo (White) EcHo (Anthracite) EcHo Plus (White) EcHo Plus (Anthracite) SieRRa II (White) TanGo AlFa II DelTa Touch Panel Quantity* Message* Submit * These fields are required. Contact us Need help? Send us an email Features Technical Specifications Software Manual Accessories FAQ Video 8-Button AV control system with iOS/Android supportThe world’s most compact AV control system – no external processors required 8 Freely configurable keypad buttonsProvides uniform AV control interface in all rooms and all 8 buttons can be configured for any function 1 Bi-directional RS-232 port or 2 IR portsUsed for controlling projectors, displays, amplifiers & other AV devices with feedback functionality 2 Uni-directional RS-232 or 4 IR ports:Used for sending commands to projectors or other AV devices using serial or infrared communication 1 Ethernet portUsed for controlling 10 LAN devices and connection to Central Control and Project Designer 3 General Purpose I/O portsUsed for input/output control of relays, switches and sensors 1 NEB port (Neets Expansion Bus)Add up to 5 additional devices - choose between Keypad, Level Control or Port Expansion (serial and I/O) 1 front USB portUsed for easy system configuration, uploading and downloading project files, service and maintenance PoE supportIncludes Power over Ethernet support to avoid external PSU (12V PSU included) Email notifications and warningsEmail notification on lamp/filter hours and warnings Infrared learnerSieRRa II comes with a built-in IR learner. Included:Configuration through our free and no-license software: Neets Project Designer Communication ports:1 x RS-232 (TX and RX) or 2 IRBaud: 1200 – 115200Data Bit: 7/8Parity: None, Even, OddStop Bit: 1/1.5/22 x RS-232 or 4 IR (TX only)Baud: 1200 – 115200Parity: None, even, oddStop Bit: 1/1.5/2IR:Transmit381 Hz – 500 kHzDevices: 21 x Ethernet port:Speed: 10/100 Mbitauto-detectDevices: 103 x I/Os (GPIO)Input:Sense Low: <1 VDCSense High: >4 VDC Output:Type: Open drainMax Voltage: 24 VDCMax Current: 0.5 ANeets Expansion Bus (NEB)12 V (0.3 A) outputIncluded in box:12 V PSU (110- 230V AC)PoE – Power over EthernetComplies with IEEE 802.3and 802.3at, type 1Dimensions:(without frame) (EU):Width: 55 mmHeight: 55 mmDepth: 17 mmDimensions:(without frame) (DK):Width: 72 mmHeight: 45 mmDepth: 17 mm Dimensions:(without frame) (US):Width: 1,77 inchesHeight: 4,13 inchesDepth: 0,94 inchesWeight: 90 g/ 3,17ozCompliancy:Approval: CE, FCC (part 15, class A)EN 55022EN 55024Product item numbers:310-0102: Neets Control – SieRRa II,EU - Polar white310-0103: Neets Control – SieRRa II,EU - Anthracite310-0202: Neets Control – SieRRa II,DK - Polar white310-0203: Neets Control – SieRRa II,DK - Anthracite310-0402: Neets Control – SieRRa II,US - Polar white Software Neets Project Designer Read more Download Neets Central Control Read more Download Please remember to login for access to the latest release of Neets Project Designer. If you do not have a Neets account, please fill out the form "Get Accesss". Firmware -Ver. 3.9.0 (31-10-2016) New Features: AMP2:25: Improved upload speed during FW update. AMP2:25: Mute from PC when USB input is selected. Added LockButton function to lock individual HW keys. Access to NEB bus from script. OsCar can now control LAN devices. Bug Fixes: Risk of RS232 connection errors with extension devices on startup. AMP2:25: JSON parsing fails if commands has been removed. AMP2:25: Auto power on/off on USB broken. Control system as extension device does not work with DHCP enabled. +Ver. 3.8.5 (02-09-2016) Changes: RS232 connection to extension device: Serial Number is no longer required. https://neetsweb is no longer available from LAN, only using USB RNDIS network. Bug Fixes: Risk of RS232 connection errors with extension devices on startup. AMP2:25: JSON parsing fails if commands has been removed. AMP2:25: Auto power on/off on USB broken. Control system as extension device does not work with DHCP enabled. Reduced internal stack load when updating LED's (status message is delayed 100ms). EcHo & EcHo Plus: Fixed clearing NEB error after reconnect of NEB keyboard. +Ver. 3.8.4 (17-06-2016) Bug Fixes: NCC support for extension control systems (updated to protocol version 3). +Ver. 3.8.3 (03-06-2016) Bug Fixes: Bugfix for possible connection loss with Barco Clickshare CSE-200 Bugfix for QuebecII - Improved VGA detection. +Ver. 3.8.2 (01-06-2016) New Features: Support for Barco Clickshare CSE-200 with Secure socket communication. (SieRRa II, AlFa II & DelTa) Changes: Improved LAN upload speed on SieRRa II, AlFa II & DelTa. Bug Fixes: Bugfix for Level Control decrease input (EcHo, EcHo Plus). Bugfix for SendEmail. Bugfix for LAN upload not working (OsCar, EcHo Plus). Bugfix for DelTa Preamp settings not preserved after FW update. KNOWN BUG: UART TX with 2 stop bits is not working! (SieRRa II, AlFa II, DelTa, SR-4, SR-8). KNOWN BUG: Extension control systems (Systems connected as slaves) must have an empty project uploaded (with static IP address of slave system). +Ver. 3.8.1 (10-05-2016) Bug Fixes: Web application cache was disabled on control systems with built in webserver New Neets Audio Amplifier - 2:25 and Neets Audio Preamplifier was not controllable from the following control systems: EcHo Plus, EcHo and OsCar Bugfix for more than 2 NEB keypads connected Bugfix for amplifier flash Bugfix for Neets Central Control communication +Ver. 3.8.0 (27-04-2016) New Features: Support for Neets Audio Amplifier 2:25 and Neets Audio Amplifier PreAmp. USB RNDIS interface (Network via USB) (SieRRa II, AlFa II, DelTa, SR-4, SR-8). Support for connecting control systems as extension devices. Support for MD5 checksum calculation (for ClickShare support). Changes: OS update (SieRRa II, AlFa II, DelTa, SR-4, SR-8). TCP/IP stack update. Updated and simplified command interpretion (SR-4, SR-8, DelTa PreAmp, Neets Audio Amplifier 2:25, Neets Audio Amplifier PreAmp). USB PID/VID is changed (SieRRa II, AlFa II, DelTa, SR-4, SR-8). 'StackAddCallback' script function now supports up to 2 parameters. Bug Fixes: Bugfix for possible Device Stack overflow KNOWN BUG: UART TX with 2 stop bits is not working! (SieRRa II, AlFa II, DelTa, SR-4, SR-8). KNOWN BUG: Extension control systems (Systems connected as slaves) must have an empty project uploaded (with IP address of slave system). KNOWN BUG: Only up to 3 extension control systems possible on EcHo Plus, 8 for all others. +Ver. 3.7.0 (11-01-2016) New Features: LAN control of SR4/8 from EcHo Plus Support for video conference from ClearOne Changes: Processor speed increased on SieRRa II, AlFa II and DelTa. Cleanup in .inc files. Bug Fixes: Fix for returning I/O output state. Fix for KeyboardLockPress event fired twice (Now only on KeyDown events). Fix for DHCP lease time, when no Renewal or Rebinding timers are received from DHCP server. Fix for not closing WebSockets when TCP stack requests socket close (AlFa II, SieRRa II and DelTa). Fix for no disconnect of RS232 loopthrough on SR4/8 devices when controled by Neets devices. Fix for not working Disable2Way function for RS485 ports (DelTa). Fix for non-working memcpy command on SieRRa II, AlFa II and DelTa. Fix for timeout with IR Learner on DelTa (at first Learn attempt). Fix for https: Whitelist. Fix for lagging sliders in SieRRa II, AlFa II and DelTa. Fix for not working RS485 port (DelTa). +Ver. 3.6.7 (06-11-2015) Bug Fixes: Fix for issue with NEB Level Control indication on EcHo Plus. +Ver. 3.6.6 (02-11-2015) Bug Fixes: Fix for incorrect version for SR4/8 in FW 3.6.5. +Ver. 3.6.5 (28-10-2015) Bug Fixes: Fix for DHCP lease time, when no Renewal or Rebinding timers are received from DHCP server. Fix for web interface "Connection lost" issue (AlFa II, SieRRa II and DelTa). +Ver. 3.6.4 (13-10-2015) Changes: Improved NEB error handling and reconnection on all systems. Bug Fixes: When sending data on NEB Expansion boards (on DelTa), data was not transmitted on the correct port (both RS232 and RS485). +Ver. 3.6.3 (13-08-2015) New Features: Neets extension device firmware included. When connecting the Neets SR-4/8 to the PC you get a RS232 where you can control the Neets SR-4/8. Changes: Neets SR-4/8 now need to be upgraeded by the Project Designer. This provide a easy firmware upgrade of the Neets SR-4/8 on all Windows computers. Bug Fixes: The DelTa now reconnect more stable to SR-4/8 when power is connected. On QueBec II/III, OsCar, BraVo, EcHo and EcHo Plus the script event @IOStateChange had swapped the IO pins state. +Ver. 3.6.2 (29-06-2015) Bug Fixes: Quebec III was by mistake using the wrong pin for HDMI detection. Introduced in firmware 3.6.1. +Ver. 3.6.1 (29-06-2015) Bug Fixes: When sending Lamp and filter hours to NCC the minutes became hours. +Ver. 3.6.0 (21-05-2015) New Features: Support for SieRRa II Bug Fixes: Problem when controlling SR-4/8 from 3.Part systems. Connection closed and Reboot of SR-4/8 was required +Ver. 3.5.2 (20-04-2015) Bug Fixes: Not possible to upgrade the Neets switching relay 4 and 8. When controling Neets switching relay 4 and 8, sometimes it could loose connection and only turning off and on the unit will fix it. +Ver. 3.5.1 (25-03-2015) Bug Fixes: Changes made to support Central Control in EcHo Plus and OsCar. +Ver. 3.5.0 (16-03-2015) New Features: Support Telnet connection when controling Video conference. Support for QueBec II/III, Bravo, Oscar, EcHo and EcHo Plus. Support for 4 addresses on NEB keyboards. +Ver. 3.4.4 (04-02-2015) Bug Fixes: The LAN interface could sometime go into a deadlock where all LAN communication stopped and a reboot was required to fix it +Ver. 3.4.3 (04-02-2015) Changes: The IP transmit buffer has been change from 100 to 512 byte Bug Fixes: When controlling a SR4/8 over TCP the connection could end up in a state where a reboot was required to make a connection to it +Ver. 3.4.2 (26-01-2015) Changes: Updating the Web socket handling of ACK after sending a TCP frame. PreAmpReceive are no longer visible in the system code. Bug Fixes: When using NEB level Control the Control was rebooting. Possible to send 2 stop bit on RS-232 ports. +Ver. 3.4.1 (13-01-2015) Bug Fixes: Not possible to IR learn +Ver. 3.4.0 (15-12-2014) New Features: Support for sub pages. Bug Fixes: Improved the websocket operation to prevent sending wrong data. When uploading a project over LAN the data was sometime corrupt. +Ver. 3.3.2 (14-11-2014) Bug Fixes: Screen control wasn't working. Improved memory handling. Moved frequently used files to ram to improve speed. +Ver. 3.3.1 (04-11-2014) New Features: Support for seamless connection between DelTa and SR-8 over LAN. Changes: When uploading a new project to the control system, the https: server are now stopped. +Ver. 3.2.4 (17-09-2014) Bug Fixes: Not possible to show DelTa preamp setup page. +Ver. 3.2.3 (02-09-2014) Changes: Files with high writing activity are moved to RAM for increase writing speed. Changes made that improve the NEB-bus recovering function. Bug Fixes: The Float library was missing tags to be used in the Project Designer. The IR transition has been improved to send a more precise IR signal. +Ver. 3.2.2 (17-07-2014) Changes: The way the system attempts to reconnect to NEB units has improved. This make the NEB bus withstand more EMC noise. +Ver. 3.2.1 (27-06-2014) Bug Fixes: Not all the settings the Preamp in the DelTa was not saved and loaded correct The Keyboard lock on the GUI was not working +Ver. 3.2.0 (20-06-2014) New Features: Possible to get individual status on TCP connections. Bug Fixes: When entering the Pre-amplifier mode on DelTa setup, the channel in the pre-amplifier was changing to channel 1 on both output 1 and output 2. When downloading a project file from DelTa by USB the sent data was wrong. When uploading by LAN, the files existing on SD card was not overwrited correctly. +Ver. 3.1.0 (27-02-2014) New Features: Support for Save and load data to SD card from script code. (LoadFromSDCard and SaveToSDCard) Changes: The GUI is not updated if the total stack delay are less than 500 ms Bug Fixes: Possible to upload a project file using LAN. Problem with changing IP address from upload dialog is now possible Support IO keyboard with 16 buttons. Possible to receive data on UDP connections. Possible to have the 10 TCP/UDP connection that are avalible in Project Designer If sending a command of 1-5 bytes to the DelTa Preamp, the system could get unstable. +Ver. 3.0.2 (16-01-2014) Bug Fixes: Upload using LAN is working Improvement SD card handling. (If you have problem with wrong displayed images, reformat the SD card and use this firmware) +Ver. 3.0.1 (10-12-2013) New Features: First release ;-) Manual for Neets Control - SieRRa II Read more Design labels in white. Here you find a nice looking design labels that fits right into the Neets Control EcHo, EcHo Plus and SieRRa II in DK and US version. Read more Design labels in Anthracite. Here you find a nice looking design labels that fits right into the Neets Control EcHo, EcHo Plus and SieRRa II in DK and US version. Use this template when printing on transparent plastic. Read more Design labels in Anthracite, Paper. Here you find a nice looking design labels that fits right into the Neets Control EcHo, EcHo Plus and SieRRa II in DK and US version. Read more Neets Switching Relay - 4 4-Relay with built-in PSU and LAN Other See product Neets Audio Preamplifier Network Controlled Audio Preamplifier with PoE See product Neets Audio Amplifier - 2:25 Network Controlled Stereo Audio Amplifier (2 x 25W) See product NEB Keypad EU size, White See product NEB Level Control EU size See product NEB Port Expansion EU size See product Neets Wall Plate, US US size, 1-gang Neets See product PIR Sensor See product Q: Why has Neets upgraded the SieRRa to a SieRRa II? A: The SieRRa II has with a brand new and powerful processor - same processor as in the DelTa. This makes the SieRRa II a very powerful device with new features including PoE (Power over Ethernet), which optimizes the power supply for the SieRRa II.While the original SieRRa only supports five devices, the SieRRa II will connect up to 10 devices via LAN. Q: SieRRa II has three I/O ports. What are they for? A: Most people opt to use two I/O ports for controlling the projector screen – one for roll-down and one for roll-up. With the third I/O port, you are able to connect a PIR motion sensor, which is brilliant for designing eco-friendly installations. You can make the PIR turn off your installation when no motion is detected and remember to time the system so that it does not turn off too soon.What you could also use your I/O for is a keyboard lock, which prevents unwanted handling of the control panel. Q: Is it possible to access a GUI (Graphical User Interface) with the SieRRa II? A: Yes, you can freely configure and design a GUI for the SieRRa II in Project Designer. Q: Can I use my SieRRa II to control IR devices and how many? A: With the Neets Dual IR Emitter PN 307-0286, the TX/IR port can be setup with four IR emitters. In case you need more IR emitters, you will need to go with an AlFa II or DelTa. Q: Why do both of the IR devices react to the same output command? A: They do so because Neets Control System sends out the same command string to both IR emitters, so if you have two similar devices using the same IR codes, they will react simultaneously. Q: Are all the button functions pre-defined? A: No, all the buttons are freely configurable with the Neets Configuration Software. Q: Is the SieRRa II expandable? Q: Yes, you can expand with up to two NEB modules, choose between up to two extra NEB Keypads and/or up to two NEB Level Controls and/or one NEB Port Expansion.For further specification, please go to our website and find Neets Expansion Bus in the product page section. Q: Why can’t I find the original SieRRa in Neets Project Designer? A: The original SieRRa has been superseded by the SieRRa II, so if you have an original SieRRa, you need to configure your project using Neets Project Editor. Q: What software should I use for configuring the SieRRa II? A: We recommend that you use the newest version of Neets Project Designer. Q: Can I use the SieRRa II with Neets Central Control? A: Yes, the SieRRa II is available in Neets Central Control. Q: Does the SieRRa II control system have different LED colors for each individual state? A: Yes, all of the LEDs change colors according to the state of each button. Q: How do I use the built in infrared learner? A: Behind the third row of buttons, there is a infrared learner. Connect the SieRRa II to your computer via USB, open Neets Device Editor and choose the port to which the SieRRa II is connected. Now learn the codes for the device as you would do with the Neets Uni IR Learner. When using the SieRRa II as an infrared learner, please make sure the control system is not in an error state. Q: Can I power the SieRRa II with both PSU and PoE? A: No, it is important to only use one of the two methods of powering the SieRRa II panel. Q: What should I do when I want to use the panel as Enhanced LAN expansion? A: Upload an empty project into the panel. This ensures that the systems are running the same firmware. Q: How does extension devices communicate with the control system? A: The Neets Control system uses Multicast to communicate. This is done on IP address 220.127.116.11 port 7979.• Each control system/extension device sends out a "keep a live" every 3 seconds.• If the control system has not received any message from an extension device for 10 sec it will indicate connection error.• The timeout is an individual timer for each extension device. • The “missing connection” indication will be removed when the connection is established and the extension device is initialized again.• The 10 sec timeout is reset whenever there are communication between the units e.g. when RS232 commands is transmitted or an event is triggered.• The control systems support IGMP, this allows the control system to only receive multicast packages on the address that it need and it also doesn't “Pollute” the entire network like UDP broadcast. In order to use IGMP the switch also need to support this. Q: The panel won't start up when i want to upload? A: Remove SD card and format in Fat32, and try again. Introduction to Neets Control SieRRa II Watch this video to get an intro to many of the great features that the SieRRa II offers.